Ken;This is a DAEWOO cloneCHASS#CN2001,Mod#DTQ26,27,29S1FCN Change C404 =1ufd/160v,it's open probably.Replace with a 3.3/250V with 105 degree C. check at D403=TP10 for 103vdc which should always be there.This tells you your power supply is working.If not check R805&R806 in power supply.ALSO a good idea to check all 800 series transistors in supply...hth...Don of HARTS-TVCR ----- Original Message ----- From: <gulftech@xxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, November 13, 2001 1:01 PM Subject: [TechAssist] Westinghouse TV, Model WTV12505, Shutdown > > Friends, > > This set goes into shutdown. Trouble is, usually plays four three or > four days before failing. The set will then not turn on unless unplugged > first. > > The ONLY thing I know of that will cause this is the HV shutdown circuit. > For those without Sams 4068, the circuit is simple. Voltage from the > flyback is rectified by D405, filtered by C414, and sent through voltage > divider R414 & R415. The voltage at the junction of R414-R415 is fed > through 9.1V zener D401 to p24 of the signal processor. There is a > resistor RC 401 & cap C401 from p24 to ground. If the voltage at that > junction exceeds 9.1, the unit will shut down. > > Problem is the set is so darned intermittent. I monitored the voltage > applied to the zener for hours. Never found it rise above 7.4 volts. I > have checked all components listed above, but changed none. > > This set is driving me crazy. Any suggestions? > > Thanks, > > > Ken Smith > Gulf Technical Services > 3034 Gulf Breeze Parkway > Gulf Breeze, FL 32561 > 850-934-8324 (Voice) 850-932-0819 (Fax) > > ________________________________________________________________ > GET INTERNET ACCESS FROM JUNO! > Juno offers FREE or PREMIUM Internet access for less! > Join Juno today! For your FREE software, visit: > http://dl.www.juno.com/get/web/. > ***************************************** > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > ***************************************** > To UNSUBSCRIBE write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. > --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.286 / Virus Database: 152 - Release Date: 10/9/2001 ***************************************** Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips ***************************************** To UNSUBSCRIBE write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.