[TechAssist] Re: VCR RCA VR506 timing Thanks!
- From: MagLfixIt4ya@xxxxxxx
- To: techassist@xxxxxxxxxxxxx
- Date: Sun, 13 Jan 2002 10:56:00 EST
In a message dated 1/13/2002 12:44:45 AM Eastern Standard Time,
jeff@xxxxxxxxxxxxxxxxxx writes:
> Subj:[TechAssist] Re: VCR RCA VR506 timing
> Date:1/13/2002 12:44:45 AM Eastern Standard Time
> From:<A HREF="mailto:jeff@xxxxxxxxxxxxxxxxxx";>jeff@xxxxxxxxxxxxxxxxxx</A>
> Reply-to:<A
> HREF="mailto:techassist@xxxxxxxxxxxxx";>techassist@xxxxxxxxxxxxx</A>
> To:<A HREF="mailto:techassist@xxxxxxxxxxxxx";>techassist@xxxxxxxxxxxxx</A>
> Sent from the Internet
>
>
> Thanks to everyone who replyed, I found the problem, it needs the "kit", I
> replaced the worn "white gear" with the black one, the end slide should be
> replaced also. Don
>
> Don,
> Replace carriage and turn load motor by hand. If the unit goes to full
> load,
> your problem is mode switch or mode switch position.
>
> Jeff
> FAX 1-413-280-0677
> Intrepid Video & Electronics
> 501 Luther Rd
> Harrisburg, PA 17111
> 717-909-8844
> mailto:Jeff@xxxxxxxxxxxxxxxxxx www.9-11-2001tragedy.com
> www.intrepid-video.com www.tech-repair.net www.thetoolcaddy.com
>
>
> ----- Original Message -----
> From: <MagLfixIt4ya@xxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>; <MagLfixTvNyc@xxxxxxx>
> Sent: Friday, January 11, 2002 10:17 AM
> Subject: [TechAssist] VCR RCA VR506 timing
>
>
> >
> > Hello Techs, when this vcr came in it had a worn link gear that operates
> the
> > cassette housing, after replacing it still will not except a cassette, it
> > takes the cassette in about half way and spits it right back out, I have
> > checked the timing in the "under chassis" such as the cam gear and slide
> > plate and the timing in the "above chassis" assembly looks good also, the
> > timing also looks good in the cassette housing.
> > If I take the housing out the carriage loads and unloads a cassette
> manually,
> > and the main mechanism loads and unloads with no problem, what am I
> missing?
> > I don't think this is a mode switch problem because as the cassette goes
> in
> > it seems to jam before it kicks back out, anyone have any idea's? Any
> help
> is
> > appreciated.
> > Don from Affordable Electronics
> > 153 Garfield Pl.
> > Brooklyn NY 11215
> > 718-788-0384
> > 718-788-2326 (fax)
>
>
------------------------------------------
Help make your TechAssist database better!
Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.
Other related posts:
- » [TechAssist] Re: VCR RCA VR506 timing Thanks!
