[TechAssist] Re: Toshiba-CX28519-TAC8915-Vert. overscan
- From: "Garbage" <damon101@xxxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Tue, 9 Dec 2003 07:34:09 -0500
Sounds like the feedback path is open if you've got overscan. Looks like
you've dealt with the linearity and power paths.
Damon Brunger
Telrad Electronic Services
Ft Wayne, IN 46815
----- Original Message -----
From: <hartstv@xxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Monday, December 08, 2003 6:01 PM
Subject: [TechAssist] Toshiba-CX28519-TAC8915-Vert. overscan
> Have done a ton of these Toshiba's as have most techs for vert
problems.This one came in with insufficient vert sweep.C305=2.2 ufd/50vdc
cured that,but then I had vert overscan,which would not adjust enough with
the vert hgt. pot;R352=2k.Replaced the following with no change;
> C301=2.2 UFD/50vdc
> C306=1000ufd/35vdc
> C308=220ufd/50vdc
> C330=10ufd/50vdc
> C310=1000ufd/35vdc
> R352=Vert hgt pot,2kohm
> IC301=AN5521
> Rechecked all my cap values.I'm an ASC for Toshiba & never had a simple
vert problem have me stumped.Checked all resistors in the vert. cct. & all
voltages are good.Inputs welcome.Maybe my yoke,which of course is
bonded..TIA..
> Don of HARTS-TVCR-ASC
> 9 Robert St,Oromocto,NB,Canada,E2V3N2
> Tel-506-357-9785,Fax-506-357-6010
> hartstv@xxxxxxxxxxx
>
>
>
>
****************************************************************************
*
> Lost Password:
> http://www.tech-assist.org and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
>
*****************************************************************************
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
