Jeff, I agree with you, however a quicker way is to disconnect all 3 convergence yoke plugs. Not as sure-fire as your B+ B- removal test, but it works 90-95% of the time. Damon Brunger damon101@xxxxxxxxxxxxxx Telrad Electronic Services Ft Wayne, IN 46815 ----- Original Message ----- From: "Shoreline Electronics" <jstielau@xxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, February 04, 2002 8:48 AM Subject: [TechAssist] Re: Toshiba projection model TP50G50 > > Mike, > > I'd be suspicious of the convergence amps. See if you can identify the B+ > connector on the convergence PC board , remove the plug & see if she fires > up. > > > Jeff Stielau > Shoreline Electronics > 125 Beech Tree Lane > Westbrook, CT 06498 > 860-399-1861 > 860-664-3535 (fax) > ----- Original Message ----- > From: <Ttkirkpat@xxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Monday, February 04, 2002 1:08 AM > Subject: [TechAssist] Toshiba projection model TP50G50 > > > > > > Set shuts down at turn on. By lifting the horizontal output transistor out > > the power sources all come up normal. I changed the vertical ic- no > change. > > Any suggestions? Thanks- Mike > > ------------------------------------------ > > Make your TechAssist database better! > > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > > ------------------------------------------ > > To UNSUBSCRIBE your email address, click here: > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > > Or send a BLANK email with unsubscribe in the > > SUBJECT field to the address above. > > > > > > > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > > ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.