This set shuts down at pluggin. I found a resister coming from the STK392-110 changed color and value. It's on the output to ground and to the input on the return. I have checked the other sections of the IC with the bad section and they are all the same. Could I have a shorted Yoke and how would you check the convergence section. Never had a convergence coil go bad before. The resister that is bad is not on the power supply line. Al Marquardt ampm@xxxxxxx Al Marquardt Electronic Repair 206 W Main Girardville Pa. 17935 ----------------------------------------------------------------------------- Jokes, complaints, off topics, general chat. Everything other than repair help problems can be found at this new list. No archives and posts will not be found on Google or any other engine!To remove or join, click: mailto:ecartis@xxxxxxxxxxxxxxx?subject=subscribe%20chat Send to the list at chat@xxxxxxxxxxxxxxx once subscribed. ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/