Regulator heating up can be caused by the following. C841 C822 C840 Change in Value of R327..(5.6 ohm) And of course change C308 in Vertical. -Ed- Tel-Tek Electronics Ontario-Canada teltek3@xxxxxxxxxxxx Ask me about the Tech Repair CD. ----- Original Message ----- From: "Bruce Tiedeman" <btied@xxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, June 01, 2004 12:22 PM Subject: [TechAssist] Toshiba Regulator STRS5041 running very hot? > Toshiba CX2858 Chassis 8815! > > Working good but the regulator is getting very hot to the touch. I replace > this regulator and Capacitors in the regulator circuit. > Capacitor C861 (2200pf) was split and caused diode D860 to short out and the > damage regulator.The regulator voltage to the H.O.T is normal 115 volts. > Nice clean pulse their also (at the H.O.T). Is this normal on these chassis, > for the regulator to be so hot or am I overlooking some thing. > > thanks > Bruce. > > B&T Electronics > 139 Margaret St > Sarnia Ontario > Canada > N7T 2Y3 > 519 344 1850 > > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/