Mando, I don't have the service manual, but I do have this tip. From Tech Repair CD: Toshiba\CZ36V51 TAC9913\Power Surge: Dead\\\TAC9913\Replaced following parts 1. Q801 str-z4214 2. D898 Mtzj39a 3. D876 Mtzj27b 4.D873 Mtzj12b 5. D875 Mtzj12b 6. Q862 Tlp621(grl) photo coupler\for safety purposes replace the following: 7. D882 Mtzj13a 8. C866 1 MFD 50 volt 9. C869 2.2 200 mfd\\\\\\\ Jeff -- Intrepid Video TV/VCR Repair 263 S Front St, Steelton PA 17113 717-939-7708; (F) 717-564-4952 www.intrepid-video.com www.tech-repair.net ----- Original Message ----- From: "armando guerra" <birdie@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, June 18, 2004 8:23 AM Subject: [TechAssist] Toshiba MOdel CZ36T31/TAC-9914 chasis This set went tru a power surge and blew the 4a pico fuse (F860) and shorted out the reg.STR-Z4214.I replaced both and now when powered on, can hear the relay and the front led stays on ( No Blinking).No sm for this tv.There is no voltage to the hot.All other fuses are ok.Would someone have the sm that can send me a pdf of the reg,power ckt. Thanks for your help. Mando Birdie's TV & Electronics Casa Grande, AZ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/