Check for burned ABL resistors on the sweep bd. Sorry don't remember there location but the are near the center of the board and should be charcoal black. Tony Saracco TCS ELECTRONICS 406 Andra Ct. Gilberts, IL 60136 tcselectronics@xxxxxxxxx ----- Original Message ----- From: "John @ Myers TV" <myers_tv_b@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, January 27, 2005 7:54 AM Subject: [TechAssist] Toshiba M#43A10 Ch#TAC0054 > Hi everybody, > > I have a Toshiba 43A10 (similar to the 50A60) with a cracked blue CRT. > Without thinking, I ran the set for a minute on just the red & Green > CRT's, > and all seems OK. > Is there anything I should be double checking before sinking a new CRT > into > this? > > Thanks, > > John Myers > Myers TV Service Company > 376 E. State St. > Alliance, OH 44601 > Phone (Voice & Fax) (330) 821-6545 > myers_tv_b@xxxxxxxxxxxxx > www.myerstv.net > > > ----------------------------------------------------------------------------- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/