[TechAssist] Re: Toshiba CZ27V51 CRT Neck ARCING
- From: Bil Green <tv.vcrrepair@xxxxxxxxxxx>
- To: Ed Gaidies <techassist@xxxxxxxxxxxxx>
- Date: Fri, 19 Dec 2003 14:00:32 -0800
Thanks Phillip, Walter and Ed
Sure enough, the filaments were open. Didn't expect the CRT in this
case. And when I broke the end off the CRT neck there was barely a
swooshing sound, not much air rushing in.
--
Best regards,
Bil Green
2001 TV VCR
Mammoth Lakes, CA 93546
760-934-2001 mailto:tv.vcrrepair@xxxxxxxxxxx
Friday, December 19, 2003, 1:11:15 PM, you wrote:
EG> Sounds like shorted CRT.
EG> -Ed-
EG> Ed Gaidies
EG> Tel-Tek Electronics.
EG> Ontario-Canada
EG> teltek3@xxxxxxxxxxxx
EG> -----Original Message-----
EG> From: techassist-bounce@xxxxxxxxxxxxx
EG> [mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of Bil Green
EG> Sent: December 19, 2003 3:39 PM
EG> To: .TECHASSIST @ freelists . org
EG> Subject: [TechAssist] Toshiba CZ27V51 CRT Neck ARCING
EG> Toshiba 27" TV
EG> Model CZ27V51
EG> Chassis TAC 9911
EG> R216 is smoking
EG> Set stays on for a fraction of a second, purple arcing inside CRT
EG> (around G2 or focus electrodes)
EG> With the CRT socket removed the whole neck lights up pale yellow
EG> instead of purple. As if the filaments were receiving 15V instead
EG> of 6V (of course the CRT socket is removed so that's not possible).
EG> R216 is still smoking with the CRT socket removed
EG> No time to measure voltages
*****************************************************************************
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
