Jeff, That sounds like the tv from hell.. Try turning on with screen control turned down. Measure screen when screen is brite and when normal, you could have a bad focus/screen control on fly.. Had same problem with a Zenith.. Bob, Bobs TV Worcester, ma woodman1@xxxxxxxx Main 508-853-1482 Fax 508-853-1480 ----- Original Message ----- From: "Intrepid Video Support" <support@xxxxxxxxxxxxxxxxxx> To: "Techassist" <techassist@xxxxxxxxxxxxx> Sent: Monday, September 22, 2003 10:54 PM Subject: [TechAssist] Toshiba CF27E30..almost fixed..bright red screen.. > > Along with the info below...after replacing those parts(T802 was OK), I found no video/no audio through > tuner and no audio through AV jacks. Found voltages on tuner twice what they should be. Received tuner > from Tip Top and now audio/video is back. > > Now, the screen gets real bright at first turn on, bright red..then dims to normal and picture looks > great. > Also, when turned on after set has cooled over night, there is a real loud burst coming from the > speakers..lasts a few seconds. This problem has been there since I restored power, but thought it may fix > itself once I took care of the other problems...I'm almost there....please help. > This is not the first Toshiba unit I have heard of power supply failure along with the tuner, fyi. > > Jeff Dougherty > Intrepid Video TV/VCR > 263 S Front St > Steelton PA 17113 > fax...717-564-4952 > www.intrepid-video.com www.tech-repair.net > > ----- Original Message ----- > From: "Intrepid Video Support" <support@xxxxxxxxxxxxxxxxxx> > To: "Techassist" <techassist@xxxxxxxxxxxxx> > Sent: Friday, May 16, 2003 9:41 PM > Subject: [TechAssist] Toshiba CF27E30..dead... > > > Following parts were originally found bad: > All the following parts were bad, replaced with Toshiba: > Q801(STRS52041) > D869 > D871 > Anyone that can help with a schematic: > Now, I also found Q802(A1020) shorted C-B. > Further inspection shows T802 shorted on secondary 7-8. I confirmed this with my Sencore out of circuit. > With D890/891 out of circuit, I get 0 ohms, but ESR shows 0.2 ohms...is there a coil causing this reading? > Could there be anything > else I am missing? > Also, this transformer is not in stock at Tritronics, does anyone have one in there bone yard? > Thank you. > jeff@xxxxxxxxxxxxxxxxxx > Jeff Dougherty > > **************************************************************************** * > Classifieds! Buy or Sell! > http://sell.tech-assist.org > The Tech Address Book: > http://www.tech-assist.org/secure/tip/contact.htm > Add a Repair Tip Here, or Change/Remove your Email Address: > http://www.tech-assist.org/secure/tip/main.htm > Lost Password: > http://www.tech-assist.org and select "Lost your Login Info?". > Email Archives: > //www.freelists.org/archives/techassist/ ***************************************************************************** Classifieds! Buy or Sell! http://sell.tech-assist.org The Tech Address Book: http://www.tech-assist.org/secure/tip/contact.htm Add a Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.htm Lost Password: http://www.tech-assist.org and select "Lost your Login Info?". Email Archives: //www.freelists.org/archives/techassist/