[TechAssist] Toshiba ARCING IN CRT NECK only at turn on
- From: Bil Green <tv.vcrrepair@xxxxxxxxxxx>
- To: ".TECHASSIST @ freelists . org" <techassist@xxxxxxxxxxxxx>
- Date: Thu, 18 Sep 2003 12:10:37 -0700
Toshiba CF3566A
1991 35" TV
There is arcing at the bottom, inside the CRT gun assembly (between a
thin metal plate and a white plastic insulator).
This happens only for a second at turn on, and at the same time, the
filament glows too bright (also just for a second).
IT APPEARS THAT THE HIGH VOLTAGE MAY BE GOING TOO HIGH MOMENTARILY
Anyone seen this happen on any TV? Would appreciate any help.
The HOT blew out when this first started. New one is holding up
(customer insists on using TV until fixed - doesn't arc except at
turn-on).
--
Best regards,
Bil Green
2001 TV VCR
Mammoth Lakes, CA 93546
760-934-2001 mailto:tv.vcrrepair@xxxxxxxxxxx
*****************************************************************************
Classifieds! Buy or Sell!
http://sell.tech-assist.org
The Tech Address Book:
http://www.tech-assist.org/secure/tip/contact.htm
Add a Repair Tip Here, or Change/Remove your Email Address:
http://www.tech-assist.org/secure/tip/main.htm
Lost Password:
http://www.tech-assist.org and select "Lost your Login Info?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
