[TechAssist] Re: Toshiba 43H70 convergence out
- From: "Avery Boyd" <adBoyd@xxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Wed, 19 May 2004 07:56:40 -0500
Change y the converg IC's and reconverg.
Avery Boyd
4666B S. Mingo
Tulsa OK 74146
Phone 918-665-2400
----- Original Message -----
From: "Keith Trumbla" <keith@xxxxxxxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Tuesday, May 18, 2004 4:32 PM
Subject: [TechAssist] Toshiba 43H70 convergence out
We have this 43H70 that has poor red convergence at the bottom of the
picture. The far right convergence adjustments don't move. Is this a bad
convergence yoke ? We tried swapping the plugs and check voltages on the
STK's. All points to yoke. Anyone had one of these before we go through the
trouble of Yanking this thing out ?
TIA
Keith Trumbla
www.bemelectronics.com
Suite 212-530 Century St
Winnipeg, Manitoba
Canada R3H 0Y4
Ph.204.775.2875
----------------------------------------------------------------------------
-
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
