Hi Jeff. Thanks for your information. I have changed the IC'S OUT TWICE. Installed a new rebuilt, I THINK, DCG Board. Does this set have a factory service menu for converge? Thanks. Avery. Avery Boyd 4666B S. Mingo Tulsa OK 74146 Phone 918-665-2400 ----- Original Message ----- From: "Jeff F" <jlfonz@xxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, April 09, 2004 6:58 PM Subject: [TechAssist] Re: Toshiba Worked on two similar ones today. All of the red is out of IC 751. These sets also used to have an intermittant burp of the DCG usaually causing red problems---one of those today had the IC and the burp problem. Didya try to converge it in the SM yet? I'd bet it works---otherwise its the DCG. TV Doctor Avalon, Wi ----- Original Message ----- From: "Avery Boyd" <adBoyd@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, April 09, 2004 1:35 PM Subject: [TechAssist] Toshiba > I am working on a Toshiba projo model # 43h70. The convergence is bad. Looks > like the red vert an d horiz is out. I have change the Chips and the digital > board, no help. All resistors and caps ck OK. any help would be excepted > with thanks. Avery > Avery Boyd > 4666B S. Mingo > Tulsa OK 74146 > Phone 918-665-2400 > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > > ---------------------------------------------------------------------------- - Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/