I have several of the mcm tenma and solomon stations, I have had bad connections on pc board,bad connections on on din plug where iron pugs in, and of course iron failure, I always keep spare irons for them, I also had two that were component failure on board, and no parts or info available, hth. charles betzler Best Electronics repair1@xxxxxxxxxxxxx ----- Original Message ----- From: "Mouton's Electronics" <moutons@xxxxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, November 17, 2003 12:56 PM Subject: [TechAssist] Tenma 21-147A Soldering Station > My soldering station doesn't adjust all of a sudden, the pot is good and all of the leds light up and the iron heats to its hottest setting regaurdless of what it is set at. I think the handel may be bad or the wires from the handle to the station not sure. > Maybe if someone ran accross this before they could clue me in on what is wrong. > > TIA > > Jason > Mouton' s Electronics > > > **************************************************************************** * > Classifieds! Buy or Sell! > http://sell.tech-assist.org > The Tech Address Book: > http://www.tech-assist.org/secure/tip/contact.htm > Add a Repair Tip Here, or Change/Remove your Email Address: > http://www.tech-assist.org/secure/tip/main.htm > Lost Password: > http://www.tech-assist.org and select "Lost your Login Info?". > Email Archives: > //www.freelists.org/archives/techassist/ ***************************************************************************** Classifieds! Buy or Sell! http://sell.tech-assist.org The Tech Address Book: http://www.tech-assist.org/secure/tip/contact.htm Add a Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.htm Lost Password: http://www.tech-assist.org and select "Lost your Login Info?". Email Archives: //www.freelists.org/archives/techassist/