David, found this: TECHNICS SUV98KM1 no power or output replace shorted ic501 svi3206d power amp, r701 47/1/2w, resolder jack packs Gary McCartney McCartney Electronics Guelph Ontario Canada Est. 1984 email: gary (at) number63.ca David Lessard wrote: > Hello All, > This unit turns "on", display is present and I can select different inputs > yet there is no output. Main output IC is one of those SVI-3205 (replaced by > SVI-3206), I've worked on a couple of these in the past, one where the > outputs were blown (this caused main fuse to blow), the other unit required > extensive resoldering. In this case I don't hear the speaker relay engaging, > this should occur a few seconds after power "on". I've resoldered all > questionable ring cracks in and around power resistors, diodes, etc. and > still the relay doesn't engage. I could use a service manual to further debug > this problem, unless of course one of you have experienced this same problem, > please do tell. > > God bless you all, > David Lessard > mr_fixit@xxxxxxxxxxxx > Alexandria, Ontario, Canada > > ----------------------------------------------------------------------------- > This Email List is accessible to the general public through search engines. > Remove: http://www.tech-assist.org/remove.htm > Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/