Last one was not explained right. If the connector doesn't fit break off the fins in the back. Al Marquardt ampm@xxxxxxx Al Marquardt Electronic Repair 206 W Main Girardville Pa. 17935 ----- Original Message ----- From: "al m" <ampm@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, March 10, 2004 8:52 AM Subject: [TechAssist] Re: TV=Tuner connectors > Clip the lead in half. And if it doesn't fit the hole break off the fins on > the back. > Al Marquardt > ampm@xxxxxxx > Al Marquardt Electronic Repair > 206 W Main > Girardville Pa. 17935 > ----- Original Message ----- > From: "TV Man" <tvman@xxxxxxxxxxxxxxx> > To: "TV Tech Line" <techassist@xxxxxxxxxxxxx> > Sent: Wednesday, March 10, 2004 11:08 AM > Subject: [TechAssist] TV=Tuner connectors > > > > I have the RCA tuner connectors # 215543. But on other brands this is to > big[where is gets soldered on to the board].I have a lot of units that the > cable pulled the connectors right out but I need a connector that where it > gets soldered to the tuner board it's smaller then the 215543. Does anyone > know were I can get some? Thanks, Dave > > TV Man > > Inverness, Fl. > > > > -------------------------------------------------------------------------- > --- > > Lost Password: > > http://www.tech-assist.org and select "Login Problems?". > > Email Archives: > > //www.freelists.org/archives/techassist/ > > > > > > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/