Jamie, CRT is getting weak. I've had excellent results in rejuving them! Lay them face down & gently tap on the neck during the rejuv process so all the crud falls out of the neck area. If you don't have a CRT checker/rejuv.....see if you can borrow one from a competitor....or now may be a good time to buy! We use a Sencore CR7000 . Jeff Stielau Shoreline Electronics Repair 125 Beechtree Lane Westbrook,CT 06498 860-399-1861 Voice 860-664-3535 Fax jstielau@xxxxxxxx ----- Original Message ----- From: "Jamie " <jandkmay@xxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, September 07, 2001 3:30 AM Subject: [TechAssist] TV Sony KV-32S20 No Raster > > No raster. Audio and high voltage ok. After tv is on for a few minutes > picture starts to blink on and off (about once every second). Turning up > screen control picture stays and is ok. I do not have schematic or s/m. Any > tips or suggestions would be appreciated. Or maybe someone would have a scan > of the schematic or s/m. > > Thanks in advance > Jamie > > > --------------------------------------------------------------- > NetZero Platinum > Only $9.95 per month! > Sign up in September to win one of 30 Hawaiian Vacations for 2! > http://my.netzero.net/s/signup?r=platinum&refcd=PT97 > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. > Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.