[TechAssist] TOSHIBA CF1311J UPDATE NO VERTICAL
- From: "fred krupalla" <f.krupalla@xxxxxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Wed, 23 Jan 2002 20:52:44 -0600
THANKS FOR ALL THE SUGGESTIONS FROM THE GROUP.I CHECKED THE YOKE AND IT WASN'T
SHORTED.CHANGED ALL VERTICAL CAPS,INCLUDING THE INFAMOUS 2.2.MFD THAT ARE THE
MOST PROBLEM.I THINK I MAY HAVE GOTTEN HOLD OF A BAD VERTICAL IC!THE ONLY
VOLTAGE THAT OFF IS THE OUTPUT SHOULD BE ABOUT 11.SOMTHING VOLT AND IS ONLY
ABOUT 3 VOLTS.I MANAGED TO FIND A PARTIAL SCHEMATIC TODAY OF SOME OF THE
VERT.CIRCUIT.I WILL LET YOU'LL KNOW IF I FIND THE PROBLEM.THANKS AGAIN AND YOUR
SUGGESTIONS ARE APPRECIATED.I'M GETTING TO OLD FOR THESE SETS BUT I REALLY LIKE
DOING IT.THE OLD EYES ARE GETTING WEAK EVEN WITH MAGNIFIER LAMP.
FRED
------------------------------------------
Make your TechAssist database better!
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.
Other related posts:
- » [TechAssist] TOSHIBA CF1311J UPDATE NO VERTICAL
