[TechAssist] Re: TA...NAP HD2717C101 27B800, no video..(was vertical prblm)

  • From: "Willie Hunter" <williehunter2@xxxxxxxxxxx>
  • To: techassist@xxxxxxxxxxxxx
  • Date: Fri, 26 Mar 2004 21:09:18 -0500

Jeff, Check the eeprom.
Willie.
Hunter TV
Detroit,Mich.


>From: "Intrepid Video Support" <support@xxxxxxxxxxxxxxxxxx>
>Reply-To: techassist@xxxxxxxxxxxxx
>To: "Techassist" <techassist@xxxxxxxxxxxxx>
>Subject: [TechAssist] TA...NAP HD2717C101 27B800, no video..(was vertical 
>prblm)
>Date: Fri, 26 Mar 2004 17:45:37 -0500
>
>This set came in with the typical vertical problem..or so I thought..
>I repaired the vertical section by replacing the two resistors, R420, R445, 
>D409, D445 and IC500 and
>repaired my traces that lifted...I double checked all the traces and they 
>are fine.
>Then, I had blue screen with retrace. Found voltages off on CRT board. 
>Found R50 on CRT open, no help.
>Resistance across R53 was half what is should be. The other two resistors 
>for the red and green measured
>correctly, pulled the resistors and measured fine out of circuit so I 
>replaced the IC TDA6106.
>Now I have raster at all, no OSD, increase G2 and all I get is raster with 
>retrace lines.
>I checked my -13 and +13 source, they are fine. I replaced the vertical IC 
>again and no change.
>Any ideas?
>Thank you.
>
>Jeff Dougherty
>Intrepid Video TV/VCR
>263 S Front St
>Steelton PA 17113
>fax...717-564-4952
>www.intrepid-video.com www.tech-repair.net
>
>
>-----------------------------------------------------------------------------
>Lost Password:
>http://www.tech-assist.org  and select "Login Problems?".
>Email Archives:
>//www.freelists.org/archives/techassist/

_________________________________________________________________
Get rid of annoying pop-up ads with the new MSN Toolbar ? FREE! 
http://toolbar.msn.com/go/onm00200414ave/direct/01/


-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org  and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/

Other related posts: