Replaced all sensors? -Ed- Ed Gaidies Tel-Tek Electronics Ontario-Canada Servicing the Consumer Electronic Industry since 1963 teltek3@xxxxxxxxxxxx -----Original Message----- From: techassist-bounce@xxxxxxxxxxxxx [mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of gear guy Sent: Saturday, February 21, 2004 10:28 PM To: tech assist Subject: [TechAssist] Symphonic VCR, SE426G, Won't play Symphonic VCR SE426G Problem: Insert tape and unit plays for around 15 seconds, stops and then powers down. automatically ejects tape when powered back up. Cleaned unit and replaed all sensors and did not help. Any help appreciated. Haven't had a VCR brought for around 2 years. Thought they were all gone LOL. TIA! Gear Guy Matt Sherer, CET 1411 Honeysuckle lane Champaign, IL 61821 m.sheer@xxxxxxxxxxxxx (217) 356-9479 ------------------------------------------------------------------------ ----- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/