Phil what do you use for lube in the mode switches? Al Marquardt ampm@xxxxxxx Al Marquardt Electronic Repair 206 W Main Girardville Pa. 17935 ----- Original Message ----- From: "Philip Bader" <tjanphyl@xxxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, December 12, 2003 9:45 AM Subject: [TechAssist] Re: Sylvania (Sears, Oct 2001) Model #SRC21134,13" TVCR - Ejects tape right after insertion > I would start with cleaning/lubing mode switch. You have to do it anyway > as good maintanence, so try. > Phil Bader > > Don Cohen wrote: > > > > Hello, > > > > One more unit from a friend! TV section of unit works fine. Belts are fine and center LED prism is not broken. Does anyone know if these units have the problems with the center LED's or the mode switch, and if problems with those would cause the unit's symptoms? If so, which would more likely be the culprit? I have seen problems with these 2 parts cause other symptoms, but not this particular one. If there is something else to be looking for, I am all eyes! > > Thanks, > > > > Don Cohen > > DC Electronics > > Shinglehouse, PA > > > > **************************************************************************** * > > Lost Password: > > http://www.tech-assist.org and select "Login Problems?". > > Email Archives: > > //www.freelists.org/archives/techassist/ > > -- > Philip Bader > Jan Phyl TV Inc. (estab. 1976) > 3420 Recker Hwy. Winter Haven, Fl. 33880 > Fax (863) 299-8821 > email: tjanphyl@xxxxxxxxxxxxxxx > > **************************************************************************** * > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > > ***************************************************************************** Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/