[TechAssist] Re: Still unsolved mystory:
- From: "OrpheusComputing.com Repair" <techassist@xxxxxxxxxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Wed, 14 Nov 2001 01:14:25 -0600
Neil, D512 should be replaced. It can check good and be bad.
Check/resolder L509, & Q506 (2SK1916).
-Clint
God Bless Us All
Clint Hamilton, Owner
http://OrpheusComputing.com
sales@xxxxxxxxxxxxxxxxxxxx
Fax: 209-882-9602
TechAssist Administration
http://tech-assist.org
techassist@xxxxxxxxxxxxx
4orpheus@xxxxxxxxxxxxx (alternates)
orpheuscomputing@xxxxxxxxx
pchardware@xxxxxxxxxxxx
(PLEASE include previous correspondence
if replying to this email!!)
----- Original Message -----
From: <tvdoctors@xxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Tuesday, November 13, 2001 12:41 PM
Subject: [TechAssist] Still unsolved mystory:
SONY KV32XBR55: Replaced Q505(shorted), R571(open),
IC531, L501(recommended replaced), and checked and
resoldered D512(Checked Ok). No schematic. Still has bowed
sides. Pincushion and Horiz.Size in service menu wont adjust
(numbers change), all other adjustments work. If I jump
across L501, I get almost full scan but I can still see that
pincushion is out of alignment. Any thoughts to getting this
set out of here would be greatly appreciated, Thanks, Neil
TV Doctors 108 W. Main St. Monroe,Wa. 98272
360-794-6469
*****************************************
Help make your TechAssist online repair tips
database better! Submit your fixes here:
http://www.circuitwork.com/techassist/tip/#tips
*****************************************
To UNSUBSCRIBE write to:
techassist-request@xxxxxxxxxxxxx
with unsubscribe in the subject line.
*****************************************
Help make your TechAssist online repair tips
database better! Submit your fixes here:
http://www.circuitwork.com/techassist/tip/#tips
*****************************************
To UNSUBSCRIBE write to:
techassist-request@xxxxxxxxxxxxx
with unsubscribe in the subject line.
Other related posts:
