[TechAssist] Re: Sony SLV-780HF

  • From: "Premium Technologies" <premtech@xxxxxxxxxxxxxx>
  • To: <techassist@xxxxxxxxxxxxx>
  • Date: Wed, 20 Feb 2002 09:03:51 -0800


Check the mode switch Neil.
Bill

Premium Technologies
27501 V Street
Ocean Park, Washington 98640
Phone: (360) 665-5984
Fax:      (775) 860-7747
email:  premtech@xxxxxxxxxxxxxx
----- Original Message -----
From: <tvdoctors@xxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Wednesday, February 20, 2002 8:26 AM
Subject: [TechAssist] Re: Sony SLV-780HF


> The L is in the hour slot. Channel number comes up on the right side of
the display.  Checked for broken or cracked gear, found none. No motors
start up when unit is plugged in or turned on. Servo motor should at least
run. I manually loaded the carriage and powered on and still the same, no
motor function. It's as if none of the motor assemblies aren't getting any
power. I've checked about every ICP there is and have not found any missing
voltages as to where i think voltages should be.  Neil
>
>
> > ** Original Subject: RE: [TechAssist] Re: Sony  SLV-780HF
> > ** Original Sender: "Jeff Dougherty" <jeff@xxxxxxxxxxxxxxxxxx>
> > ** Original Date: Tue, 19 Feb 2002 22:52:29 -0500 (EST)
>
> > ** Original Message follows...
>
> >
> > Neil,
> > Are you sure the "L" is for hours?
> > Flip down the front cover and press the input select button.
> > This won't solve your tape problem, but it will then show channel on
> > display.
> >
> > Jeff
> >
> > FAX 717-564-4952
> > Jeff Dougherty
> > Intrepid Video & Electronics
> > 501 Luther Rd
> > Harrisburg, PA 17111
> > 717-909-8844
> > VCR tips, electronics info & general interest.
> > www.intrepid-video.com www.tech-repair.net www.thetoolcaddy.com
> >
> >
> > ----- Original Message -----From: <tvdoctors@xxxxxxxxxxxxx>
> > To: <techassist@xxxxxxxxxxxxx>
> > Sent: Tuesday, February 19, 2002 4:42 PM
> > Subject: [TechAssist] Sony SLV-780HF
> >
> >
> > > No print for this.   Unit comes on but no motors running. Won't take a
> > tape. Channels and menu's work.  Display comes on, but has (L) for hrs
00
> > for minutes and 11 for seconds.Can't change or  reset. Is this an error
> > code?  Any other suggestions?   Neil
> > >
> > > TV Doctors    108 W. Main St. Monroe,Wa. 98272    360-794-6469
> > >
> > > ------------------------------------------
> > > Make your TechAssist database better!
> > > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> > > ------------------------------------------
> > > To UNSUBSCRIBE your email address, click here:
> > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > > Or send a BLANK email with unsubscribe in the
> > > SUBJECT field to the address above.
> > >
> >
> > ------------------------------------------
> > Make your TechAssist database better!
> > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> > ------------------------------------------
> > To UNSUBSCRIBE your email address, click here:
> > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > Or send a BLANK email with unsubscribe in the
> > SUBJECT field to the address above.
> >
>
>
> >** --------- End Original Message ----------- **
>
> >
>
> TV Doctors    108 W. Main St. Monroe,Wa. 98272    360-794-6469
>
> ------------------------------------------
> Make your TechAssist database better!
> Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.

------------------------------------------
Make your TechAssist database better!  
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.

Other related posts: