Sony vcr SLV-660HF dead. Remove power supply from unit and there are supplies present on connector. Plug P.S assy back into chassis and supplies are gone. Checked for low impeadance at main board connector and none checked low. Hooked up a load to P.S unit out of VCR and runs a 300ma lamp no problem. Don't have a schematic on this one. Any idears ? TIA Keith Trumbla O/O B.E.M Electronics Inc. Est.1954 839 Ellice ave. Winnipeg Manitoba, Canada R3G 0C3 Ph.(204)775-2875 Fax(204) 774-9192 www.bemelectronics.com _________________________________________________________________ Surf the Web without missing calls! Get MSN Broadband. http://resourcecenter.msn.com/access/plans/freeactivation.asp ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/