Sounds like you still have a bad solder connection somewhere. preston McGiboney wrote: > This tv sony kv8ad10 came in with scratch audio that > went up and down. Tip from frank was to resolder pins > 1,2,3,4 on Ic 201. This eliminated that problem but > when unit is first turned on there is no audio for a > while. If you tap board the audio comes on and stays > but you can not get it to cut out again to trouble > shoot. Any ideas? > > Thanks > > Preston > > __________________________________________________ > Do You Yahoo!? > Yahoo! Greetings - Send FREE e-cards for every occasion! > http://greetings.yahoo.com > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. -- Doug Keller Wis-Kel Electronics 101 Freeland Ave. Terra Alta, WV USA 26764 1-304-789-5889 ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.