Maybe a case of garbage-in, garbage out? what do the rgb inputs look like? got waveform signal or just some dc level?? Jim McVey McVey Alltronix 327 Broadway Newburgh N.Y. 12550 Factory authorized service for over 20 major brands. 845 561 8383 ----- Original Message ----- From: "Hoyt's TV" <hoytstv@xxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, October 22, 2004 2:30 PM Subject: [TechAssist] Sony KV36FS12 overbrite/shuts down > Overbrite and shuts down. > Not in tips and I have no schematic. > It has a TDA 6108JF / IC1701 which appears top be the CRT driver for all > three guns. It has over 200v on one pin (input?) but only about 11v coming > out to the cathodes. > I think it is the likely problem. Can anyone confirm? > > > Russ Hoyt > Hoyt's TV > Exeter, NH > > > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/