Chad, do you have HV, filaments lit? IK pulse to crt board and back to jungle IC? G2 voltage approx. 400v ? Give us a little more info, I`m sure one of us (or more) can help. Larry E Larry Eastman American TV & Electronics Crystal River, Fl. 34428 ----- Original Message ----- From: <cgriff4000@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, January 05, 2006 5:13 PM Subject: [TechAssist] Sony KV32s20 No video or OSD, sound ok. Red light blinks continuously. > I have a Sony KV32s20. No video or OSD but sound is ok. Red light blinks continuously. I have a good 135v. I suspect a problem with 9v because it is a little low, 8.3v. > > When power is on I have 135v on pins 1,2, and 4 of fly. Pins 5-10 are 0 v and pin 11 is 7 v. > > > Thank you, > Chad > Griffiths TV/VCR > Schenectady, NY 12303 > > -------------------------------------------------------------------------- --- > This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm > Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ > > > > -- > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.1.371 / Virus Database: 267.14.12/220 - Release Date: 1/3/2006 > > ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/