Yes Al, I am not familiar with this condition., hoping some one has had this problem before. With no signal to the T.V and the screen control up all the way I see a weak blue deflection with a faint green horiz bar about 4" wide on right side of CRT. The filament voltage is good 24VPP. I also forgot to mention that the CRT is OK, I did check it originally thinking this was the problem. I will have to order and try the jungle I.C, must be the problem? It is not the price of the part as much as the wait. I also checked the blink codes and it said could be jungle I.C or IK circuit when the panel light blinks continuously. thanks Bruce ----- Original Message ----- From: "al m" <ampm@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Sunday, December 18, 2005 11:11 AM Subject: [TechAssist] Re: Sony KV-32s20 No Audio or Video? flashing panel light continuously? > With the screen control all the way up, shouldn't you get retrace lines > with > white raster? > Al Marquardt > ampm@xxxxxxx > Al Marquardt Electronic Repair > 206 W Main > Girardville Pa. 17935 > ----- Original Message ----- > From: "Bruce Tiedeman" <btied@xxxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Friday, December 16, 2005 4:55 PM > Subject: [TechAssist] Sony KV-32s20 No Audio or Video? flashing panel > light > continuously? > > >> Help appreciated, >> I suspect the jungle I.C, but want to check in before ordering the part.. >> I >> have high voltage. Turning up the screen control fully produces a dark >> raster. If I remove the CRT video board, the light on the front panel >> still >> is flashing . I do have 203 volts at each cathode on the CRT board. I can >> follow the video signal into IC 351 but at pin 4(6) it is gone only a >> curved >> trace. The IK input to this I.C has 2.5 volts. I have checked all the >> caps >> around IC351. I did change the 3.57 MHZ crystal but still have poor >> reading >> there with my scope .I suspect this T.V was worked on previous showing >> I.C >> 351 and I.C 1261 freshly soldered. >> I can change the tuner channels and send a RF signal through so figure >> the >> tuner is OK. I do not have a trouble shooting guide so this is what I >> have >> checked. >> Any help would be appreciated, >> I do have a print, >> thanks >> Bruce. >> >> >> ----------------------------------------------------------------------------- >> This Email List is accessible to the general public through search >> engines. Remove: http://www.tech-assist.org/remove.htm >> Set Vacation >> mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation >> Lost Password: http://www.tech-assist.org and select "Login Problems?". >> Email Archives: //www.freelists.org/archives/techassist/ >> >> > > > ----------------------------------------------------------------------------- > This Email List is accessible to the general public through search > engines. Remove: http://www.tech-assist.org/remove.htm > Set Vacation > mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/