Sounds like you might be on the right track. I do not have a manual for this set nor any tips on this symptom, but I do suggest looking to see if you are getting sync signals back to the micro. Bob Waterman, CET® #RI-28 Master Technician License #9109 Service Manager / Parts Manager Gemini Computer, TV, & Security Alarms (508)695-7302 (508)695-7769 FAX geminitv@xxxxxxxxxxxxxxxx geminitv@xxxxxxx www.geminicomputertvsecurityalarms.com ----- Original Message ----- From: "Janet Fantauzzi" <fantaj@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, February 11, 2004 12:24 AM Subject: [TechAssist] Sony KV27SXR10 No Color or OSD > Need help on a Sony KV-27SXR10. > No OSD, no color. > Cannot tell if color is at a minimum as no OSD means no menu to read. > All voltages have been checked, including IC107, the 5v regulator . > Replaced CX848, Y/C chip, no help. > Can anyone tell what is the pulse amplitude, at collector of Q113, the horizontal pulse amplifier, getting only 0.1VPP.Sam folder does not specify. > Any help will be appreciated. > Thanks fuzz > Fantaj TV > Belle Vernon, Pa. 15012 Retired > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/