No print needed. Change the STR regulator with an OEM replacement & resolder all the high temp spots on the power supply module and main module. These STRS run hot hot hot!!!! ================================= Jeff Stielau Shoreline Electronics Repair 344 East Main Street Clinton,CT 06413 (860)399-1861 (860)664-3535 FAX jstielau@xxxxxxxx ================================= ----- Original Message ----- From: "Bruce Tiedeman" <btied@xxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, September 21, 2004 1:33 PM Subject: [TechAssist] Sony KV-27EXR15 (SCC-D61A-A) NO B+130v. >I checked the members area , this chassis is not there unless it crosses to > some thing else. It is was made in the U.S in 1990. If some one has a > print > for the power supply they would share would be appreciated. > There is a relay click and 160 volts at the main power filter.No light on > the front panel. No B+ at the H.O.T. I checked the Horiz section with my > Sencore TVA92 OK. > thanks for your help, > Bruce. > > B&T Electronics > 139 Margaret St > Sarnia Ontario > Canada > N7T 2Y3 > 519 344 1850 > > > > ----------------------------------------------------------------------------- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/