If you used a Replacement Flyback, I'd look there 1st. Or try heating and chilling some of those caps. Any Horizontal Hold controls in it ??? Peggs At 01:00 PM 11/22/02 -0500, Edward Gaidies wrote: > >Set came in with Flyback split right across the center...Replaced..now have >picture, but top half of picture pulls off to the right badly. Almost looks >like horizontal sync bad, but mostly top of screen. I know we could probably >ESR every cap in the set, and would test bad..(1980). Don't want to rebuild >the set, so are there any caps someone has run across that will cause this >problem? >Besides that CRT looks reasonable. > >-Ed- >Ed Gaidies >Tel-Tek Electronics >Ontario-Canada > >teltek2@xxxxxxxxxxxx > >------------------------------------------ >To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html >To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html >------------------------------------------ >***NEW*** Tips Added Instantly!!!*** >Submit Repair Tips here: >http://www.tech-assist.org/secure/tip/ > Peggs' Electronics 1519 West 2nd Street Owensboro,KY 42301 270-926-4968 fax 270-686-7399 ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/