[TechAssist] Re: Sony KV-214FV300 / BA-6 chassis Shuts itself of

  • From: "Dave Huston" <HustonTV@xxxxxxxxxxxxxx>
  • To: <techassist@xxxxxxxxxxxxx>
  • Date: Wed, 13 Jul 2005 22:09:50 -0400

Hello Buck,
I think you will find the schematic at
http://schforfree.seedhost.com/archive/?path=Sony%2FVideo . Look for the
file Sony KV-2@FS100_KV-2@FV300_KV-2@xxxxxxxxx  I have already reached my
download limit for the week but you can download it free. You don't need to
register for 1 download.
Hope it's the right one for your set.

Dave
Huston TV & Electronics
2846 Marion-Cardington Rd.E.
Marion, Ohio 43302
email: HustonTV@xxxxxxxxxxxx
----- Original Message -----
From: "Larry E" <videotech@xxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Wednesday, July 13, 2005 9:06 PM
Subject: [TechAssist] Re: Sony KV-214FV300 / BA-6 chassis Shuts itself of


Buck, model is a typo right (KV24FV300 right?) don`t have the schematic but
I  have run into one or two of these,
check IC600 and see if voltage is constantly fluctuating on  pins 2 & 3  if
so replace bridge D611 (part of it
will check bad) USE SONY ONLY,  it`s a special high speed bridge part #
871906240.
Also check R640 1K 1/2 watt if it`s burned up you`ll have a bad IC600, this
is supposedly caused by an arc
from the crt dag to Q600`s heatsink which isn`t grounded so it jumps to
IC600, theres supposed to be a bulletin of
some kind to stop this arc  but I don`t have that info, Sony ASC`s might be
able to help out, this is all I have, hope it
helps, Larry E

Larry Eastman
American TV & Electronics
Crystal River, Fl. 34428
----- Original Message -----
From: "STERLING PASHER" <spasher@xxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Wednesday, July 13, 2005 5:29 PM
Subject: [TechAssist] Sony KV-214FV300 / BA-6 chassis Shuts itself of


> Came into the store yesterday and will not stay on. It tries to start but
> shuts itself off immediately. The SMPS comes up momentarily but then shuts
> down. If I remove the voltage from the HO and the SMPS stays on stays on.
> The F/B rings OK.all diodes checked and caps ESR'D. Yoke seems OK. I'm
> running out of ideas and don't have schematic. Sounds like a F/B problem
> although it rings good. Anyone run into this before. Has anyone got
> schematic
> Buck Pasher
> Buck's TV
> Gander Newfoundland
> Canada
> 709-256-7738 (Fax & Phone)
>
>
>
> --------------------------------------------------------------------------
---
> This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
> Set Vacation
mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
> Lost Password: http://www.tech-assist.org  and select "Login Problems?".
> Email Archives: //www.freelists.org/archives/techassist/
>
>


----------------------------------------------------------------------------
-
This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
Set Vacation
mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
Lost Password: http://www.tech-assist.org  and select "Login Problems?".
Email Archives: //www.freelists.org/archives/techassist/




-----------------------------------------------------------------------------
This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
Lost Password: http://www.tech-assist.org  and select "Login Problems?".
Email Archives: //www.freelists.org/archives/techassist/

Other related posts: