Sony TV-VCR combo KV20M20 Dead (the ul code is 146 so this is a Goldstar set with a sony CRT) MFD 1995 Have tried replacing the self-exciting swmode regulator, removed the Vert IC and audio IC. Tested the caps and diodes on the primary side of the SW mode transformer. the output from the transformer is low ie 40v reads 12.7V, 12 & 17 V are 2-3V.. When pluged in can hear the swmode supply start once with VCr connected, W/O vcr goes in pulses of 3. No B+ start indicated (H.O.T. collector doesn't have voltage) Anyone run into this before? Peter OLiver Tucson Radio TV _________________________________________________________________ MSN 8 with e-mail virus protection service: 2 months FREE* http://join.msn.com/?page=features/virus ------------------------------------------ Submit A Repair Tip For Everyone Here: http://www.tech-assist.org/secure/tip/main.html ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html