Sony 12" commercial use only TV monitor from 1983 CVM-1270 SCC469A-A Set came in with a severe screeming power supply. 2 caps were bad on the upright SW mode supply. A 47uf and a 2.2uf changing them eliminated the screaming from the supply. Set will now run for a few min (3-5 min) then go to what appears to be high voltage shutdown ( I've tried removing the overvoltage shutdown lead from the HV static convergace block with out luck). Set usualy only starts on the second try (It was only starting with my meter across the 110 dc supply from the PS board (simulated the meter with a 1 meg). Also there is a resitor out to the sound first 2 digits are 27 multiplier is out I was thinging it was r185 but don't have the set in front of me at the moment to verify. Don't have a schematic. Any ideas? Peter Oliver Tucson Radio TV ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Lost Password: http://www.tech-assist.org and select "Login Problems?". Appliance Repair List: http://www.tech-assist.org/secure/tip/chatjoin.htm#app Email Archives: //www.freelists.org/archives/techassist/