Walt, From Tech Repair CD: SHARP\13VTK100\NO PLAY- CAPSTAN DOESN'T RUN\\\\D7711 IN SERIES WITH CAPSTAN VCC OPENS UNDER LOAD\\\\\\\\\ SHARP \25VTK100\Intermittent Shutdown When Playing Tapes - Heads Spin Up Too Fast\\\\Found That Flexing The Drum Motor Circuit Board Would Make It Act Up. Resoldered The Flatpack Ic* M56747afp And Problem Cured\\\\\\\\\ SHARP\13VTK100\GOES TO SHUT DOWN- TV OR VCR\\\\CHECK 115V LINE- JUMPER R738 W/ 1MEG TO GET RANGE DOWN TO 115V\\\\\\\\\ Jeff -- Intrepid Video TV/VCR Repair 263 S Front St, Steelton PA 17113 717-939-7708; (F) 717-564-4952 www.intrepid-video.com www.tech-repair.net ----- Original Message ----- From: "Walt" <avsgi@xxxxxxxxxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, May 19, 2004 7:43 AM Subject: [TechAssist] Sharp 13VT-K100M powers up then shut down. Have done alignment... Hello Fellow Techs, have a Sharp 13 inch combo tv/vcr. the set comes on just along enough to put a tape in and then ejects out then shuts down.If a tape is not inserted within a period of time will power off which thought may been alignment. Have done a deck alignment. The video cylinder rotates pinch roller engages but the capstan does not rotate. have checked the capstan motor and it is good. Do not have a schematic for this unit so wonder if someone may know of a solution to problem. Thanks, -- Walter.... Audio Video Service of Granville, Inc. 2106 Sunset Road Oxford, N.C. 27565 919.693.1066 www.audiovideoservice.com ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/