I sent this out originally on Saturday. Not a good time to find help! And I need help. Will try again. This set won't fill the screen. I've gone into the service menu and tried to adjust. VERT DC has a range of 1-4. In anything but 4, the OSD (but not the pix behind it) rolls vertically. In 4, it is in sync. Adjusting vertical height will fill the screen at the top, but no pix below 3/4 way down the screen. I replaced the LA7840 and one vertical cap with elevated ESR. No change. The diodes in the circuit check good. Anyone have a scan of the vertical circuit, or a tip on what I may be missing? TIA, Ken Smith Gulf Technical Services 3034 Gulf Breeze Parkway Gulf Breeze, FL 32563 850-934-8324 (Voice) 850-932-0819 (Fax) ________________________________________________________________ The best thing to hit the Internet in years - Juno SpeedBand! Surf the Web up to FIVE TIMES FASTER! Only $14.95/ month - visit www.juno.com to sign up today! ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/