Sears Model: 626.54808490 Chasis: PTV610 Below is my original post. I took the front panel off the TV exposing the CRT's and then turned the set on. The neck of one of the CRT's lit up like the fourth of July. All kinds of sparking and arcing going on in there till the HV shut off. Still had sound. I decided to pull the CRT board off of this CRT to see if the HV stayed on and hoepfully find the cause of this problem. When I turned the set back on, it fried 2 resistors and the HOT. Maybe I'm crazy but I thought pulling the CRT board off would not hurt anything. Any help appreciated. Matt Unit has sound but no picture. This is another set that a shop has looked at and then sent to me to fix. They replaced the focus block and did not help. When disconnect FBT from focus block, HV comes back up. Possible bad block I guess. Anyone have a print for this set? Matt Sherer Champaign, IL __________________________________________________ Do You Yahoo!? Great stuff seeking new owners in Yahoo! Auctions! http://auctions.yahoo.com ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.