Try removing the micro and clean off any corrosion. HTH Kevin Wilks Kevin's TV & Video Repair Penticton BC Canada kevintv@xxxxxxx -----Original Message----- From: techassist-bounce@xxxxxxxxxxxxx [mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of armando guerra Sent: Monday, June 14, 2004 8:07 AM To: techassist@xxxxxxxxxxxxx Subject: [TechAssist] Sanyo Model # DS27630/Windex induced problem. Does anyone here have the sm for this set that can scan the tuning section for me?It came in with nothing but snow on screen.The 27v and the 12v are at the tuner.I subbed the tuner but still the same.Two of the tact switches were bad so I replaced them .The customer said that her kid sprayed the pix tube to clean it and thats when it started the problem.R106 is ok.On the tuner pin for the tuning voltage,As I scan tru the ch,it will not vary in voltage at all.Stay's at 27v all the time.Maybe a pll problem.Probably the micro but need to verify.Thanks for any and all the help. Mando Birdie's TV & Electronics Casa Grande,AZ ------------------------------------------------------------------------ ----- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/