It is pretty common for the audio output IC (TDA7231A) to have leakage to the mute line and will cause no sound even in a stereo TV, muting both audio outs. If that's not it, check the resistors around IC101 (LA7673) and T131 off pin 4, otherwise change IC101. John. Mian TV longmon, Co 80501 303 776 6955 Hermantvr@xxxxxxxxxxxxx wrote: > This Sanyo DS25630 has no sound. Have 15v on pin 1 of I001. There is no > sound coming in on pin 4. Traced sound path back to pin 6 of IC101 (LA7673) > and there was no sound there. The only place I can find audio is on pin 1 of > IC101 Lifted Pin 6 and there was still no sound on the pin itself. Replaced > IC 101, and still no sound. Have 3.7 volts on pin 6 of IC101 and 3.9 with pin > 6 liftedshould be 5.1 volts. Any help will be appreciated. > Tommy Herman > Hermant TV > Taylorsville NC > > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.tech-assist.org/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > > > ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.tech-assist.org/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/