John: I have to ask. How long did it take to remove install a 80 pin surface mount. Man that must have been time consuming. Did it remove and install and not pull up any runs? Also do you have a special machine to remove and install. All I have is my 60 watt Weller. I don't think I could handle that 80 pin. I do the small ones. Looks like I am going to have to get a station to remove and install them soon with the different heads. Pace wants 2K for one. Many micros and now even jungles are that big now. Good topic to see how most of you handle these? Comments? Perry Bower Electric Medic "It's Cheaper to Keep Her" http://www.electricmedic.com Check out the Electronic Repair Screensaver We created. More Images to come! To download these Collections you must first install the Eyetide Viewer: http://www.eyetide.com/download/?s=O3OfmSLHXygGHCv1W6Gz3Bgjtq3DNNMNdcKsYSVGC "We're Number One Where it Really Counts, With our Customers" 3850 Washington Road Suite 4C Augusta, Georgia 30907 Phone: 706-8MEDIC4 (863-3424) Phone: 706-863-3474 Fax: 706-863-2316 mailto:info@xxxxxxxxxxxxxxxxx "WE REPAIR WITH CARE" -----Original Message----- From: techassist-bounce@xxxxxxxxxxxxx [mailto:techassist-bounce@xxxxxxxxxxxxx]On Behalf Of John Mielke Sent: Friday, September 09, 2005 7:58 PM To: techassist@xxxxxxxxxxxxx Subject: [TechAssist] Re: Sanyo DS19204 no vert I just had a DS25204-01 (similar or same?) that had no vertical deflection. It turned out to be IC101 LA76843N, a 80 pin surface mount. Apparently this is a common problem, we had to wait about 2 - 3 months for the chip. I don't think it was expensive. Sorry, I do not have a schematic for either model. The vertical out on IC101 is on pin 26. The DS25204 is very similar to DS25320 in Sams 4801 except the DS25204 gets it's vetical B+ from the smps off D626 cathode and not from the fly. Let us know what you find, John. John Mielke Main TV 636 Main St Longmont, Co 80501 303 776 6955 303 776 0792 fax www.longmontmaintv.com maintv2004@xxxxxxxxxxx ----- Original Message ----- From: <jhoeme@xxxxxxxxxxxxx> To: "Techassist" <techassist@xxxxxxxxxxxxx> Sent: Friday, September 09, 2005 4:22 PM Subject: [TechAssist] Sanyo DS19204 no vert > Output IC501 (LA78040N) has 24V on pins 2 and 6. > All associated components check ok. > I cannot see any input pulse or ramp on input pins 1 or 7. > I do not have a schematic. > Any history on this one? > TIA > Jerry Hoeme > Jerry's TV Service (Estb 1978) > 840 So. Kansas Ave > Liberal, KS 67901 > -------------------------------------------------------------------------- --- > This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm > Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ > ---------------------------------------------------------------------------- - This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/