I have gotten rid of head bearing noise by letting the deck run overnight upsidedown. The lube I have tried, and had good results with is automitive transmission fluid BUT only use a tiny drop of it. I use a needle to apply a very small amount. Jim Maxfield Electronics Northfield, NH 03276 USA sandman@xxxxxxxxxxxxx ----- Original Message ----- From: "Joe Prokup" <pro501@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, February 20, 2002 3:56 PM Subject: [TechAssist] Sansui TV/VCR > > Have a Sansui TV/VCR Model COM311AD. > Works good-when playing tape has noise coming from deck. > Removed tape player-found noise coming from upper bearing on Video > drum-lower bearing appears "less" noisy! > Is there a cure for bearing noise?The bearing looks like a sealed unit! > > > Joe Prokup > PRO-ELECTRONICS > Spring Valley, IL > PH 815-663-3005 FAX 815-371-1234 > pro501@xxxxxxxx > > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > > ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.