Hi Don any eeprom will work in that Samaung .try one from an RCa chassis Eric Eric Manuel Deer Lake Nfld Canada Don Hartigan wrote: > > Tks for your reply Bob,however when I scope pin 5 of IC701=AV switching IC > there is good video.This is the TV i/p pin.On pin 14,the o/p I have no > signal.If I lift pin 14 & jumper my i/p to the trace where I lifted pin 14 > my video appears on the tv.That's why I'm assuming this IC is bad or does > the EEPROM enable this IC to allow the video signal to pass through? > Don of HARTS-TVCR''ASC'' > 9 Robert St,Oromocto,NB,Can,E2V3N2 > hartstv@xxxxxxxxxxx > Tel-5063579785,fax-3576010 > cel-4701719 > ----- Original Message ----- > From: "Gemini Computer & TV" <geminitv@xxxxxxxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Wednesday, March 10, 2004 10:18 AM > Subject: [TechAssist] Re: Samsung,TV,mod#TXE2545,chass#KCT52A,No vert > FIX,Now no sound or Pix > > > That sounds like you may very well have a bad EEPROM which is a very > common > > failure on these. I suggest you order and try one. > > > > Bob Waterman, CET® #RI-28 > > Master Technician License #9109 > > Service Manager / Parts Manager > > Gemini Computer, TV, & Security Alarms > > (508)695-7302 > > (508)695-7769 FAX > > geminitv@xxxxxxxxxxxxxxxx > > geminitv@xxxxxxx > > www.geminicomputertvsecurityalarms.com > > > > > > ----- Original Message ----- > > From: "Don Hartigan" <hartstv@xxxxxxxxxxx> > > To: <techassist@xxxxxxxxxxxxx> > > Sent: Tuesday, March 09, 2004 6:26 PM > > Subject: [TechAssist] Samsung,TV,mod#TXE2545,chass#KCT52A,No vert FIX,Now > no > > sound or Pix > > > > > > > Unit had no vert. sweep;Replaced TDA8350=IC301.Now have no sound or > > pix.A/V > > > i/p's are good.All volts to tuner are good,ie 5,12 & 30 vdc.Replaced > > > tuner,no help.Think it may be the A/V switching IC701=M51321,not > switching > > > into the tuner mode.Have searched all my sources for a data sheet so I > can > > > scope this IC & had no luck.Can someone send me a pdf or pin out for > this > > > IC.Has anyone got any other ideas for this problem.The reason I think > the > > > switching IC 701 is latched up is when I select tuner & i/p video on the > > > video i/p jack I get my pix,but of course it shows the video I have > > > inputted.........TIA........... > > > Don of HARTS-TVCR''ASC'' > > > 9 Robert St,Oromocto,NB,Can,E2V3N2 > > > hartstv@xxxxxxxxxxx > > > Tel-5063579785,fax-3576010 > > > cel-4701719 > > > > > > > > > > > > > -------------------------------------------------------------------------- > > --- > > > Lost Password: > > > http://www.tech-assist.org and select "Login Problems?". > > > Email Archives: > > > //www.freelists.org/archives/techassist/ > > > > > > > > > -------------------------------------------------------------------------- > --- > > Lost Password: > > http://www.tech-assist.org and select "Login Problems?". > > Email Archives: > > //www.freelists.org/archives/techassist/ > > > > ----------------------------------------------------------------------------- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/