----- Original Message ----- From: "jonas miglinas" <miglinasj@xxxxxxxxxxx> To: "Gemini Computer & TV" <geminitv@xxxxxxxxxxx> Sent: Sunday, October 17, 2004 7:24 PM Subject: Re: [TechAssist] Samsung TXK2768C/XAA Fixed >Second try sending this message out. Thanks to William Rayburn and Bob Waterman for the schematics and guides > they sent me. The final fix was the horizontal output transistor. This > 2SD1880 checks good in and out of circuit. When you apply ac, the voltages > to the regulator circuits are just about nil (no 12v standby or 5v to the > micro).The voltages returned when I physically pulled the transistor out of > the circuit. Must have a trace going to ground from the collector, but for > the life of me can't see anything on the transistor itself (with a > magnifying glass), or burned marks to the heat sink. Airplay now going for > the third day. > Glad this one is over with. > > Jonas Miglinas > Miglinas TV > Chicago > ----- Original Message ----- > From: "Gemini Computer & TV" <geminitv@xxxxxxxxxxx> > To: <miglinasj@xxxxxxxxxxx> > Sent: Thursday, October 14, 2004 6:14 PM > Subject: Re: [TechAssist] Samsung TXK2768C/XAA > > > > Jonas, > > Here are the troubleshooting guide, IC801 voltage table and parts list > > (attached PDFs). I will upload the schematics to the members area as: > > > > TXJ2768_Schematic_Diagram.pdf > > > > Bob Waterman, CET® #RI-28 > > Master Technician License #9109 > > Service Manager / Parts Manager > > Gemini Computer, TV, & Security Alarms > > (508)695-7302 > > (508)695-7769 FAX > > geminitv@xxxxxxxxxxx > > > > > > > > ----- Original Message ----- > > From: "jonas miglinas" <miglinasj@xxxxxxxxxxx> > > To: <techassist@xxxxxxxxxxxxx> > > Sent: Thursday, October 14, 2004 2:04 PM > > Subject: [TechAssist] Samsung TXK2768C/XAA > > > > > > > Hello all, > > > Set came in dead and I found L405 burned to a crisp. Replaced it and > still > > no start up. Checked all parts in line with L405, and all ok. Working in > the > > power supply I find that the Q801 regulator voltage is almost nil in > > standby. Testing the regulator with my ohm meter shows the regulator > should > > be ok. Can't seem to find the 5v to the micro. Does anyone have a > > schematic(power supply/micro) that they can download to the members area. > Or > > possible tip of what to look for. Haven't seen too many Samsungs in my > area > > for two years and therefore don't keep up with the literature > > > > > > Your help always appreciated, > > > > > > Jonas Miglinas > > > Miglinas TV > > > Chicago > > > > > > > -------------------------------------------------------------------------- > > --- > > > Lost Password: > > > http://www.tech-assist.org and select "Login Problems?". > > > Email Archives: > > > //www.freelists.org/archives/techassist/ > > > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/