[TechAssist] Re: Samsung TXG2746 power cycles when power is pushed
- From: Eric Manuel <tvman@xxxxxxxxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Sat, 12 Nov 2005 20:53:09 -0330
Peter check this cap C801 470 UF 250V MAIN FILTER CP also another
cap C816-1000@35 volts close to the vert heatsink.I will send you a
schematic next..Eric
Peter oliver wrote:
>Samsung
>TXG2746
>
> When power is pressed the set attempts to start then appears to shut
>down and try to start repeatly on about a 2-3 sec interval. Have tried
>disconnecting: Yoke, CRT board, Vert IC. Rang Flyback. No HV is sensed
>(static) during start cycle.
>
>Ideas?
>
>Peter Oliver
>Tucson Radio TV
>(I do not have the schematic for this set so am going by board markings)
>
>
>-----------------------------------------------------------------------------
>This Email List is accessible to the general public through search engines.
>Remove: http://www.tech-assist.org/remove.htm
>Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
>Lost Password: http://www.tech-assist.org and select "Login Problems?".
>Email Archives: //www.freelists.org/archives/techassist/
>
>
>
>
--
Eric
E M Electronics
59 Wights Rd
Deer Lake NL
Canada
A8A 2J2
Ph# 709 635 2627
tvman@xxxxxxxxxxxxxxx
eric.manuel@xxxxxxxxx
-----------------------------------------------------------------------------
This Email List is accessible to the general public through search engines.
Remove: http://www.tech-assist.org/remove.htm
Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
Lost Password: http://www.tech-assist.org and select "Login Problems?".
Email Archives: //www.freelists.org/archives/techassist/
Other related posts:
