What temperature is it running at? I had a newer Panasonic that blew the vertical IC and every part in the vertical circuit was fine. It too, ran very hot, so I decided to add another heat sink to the vertical IC heat sink and lowered the temperature of the heat sink by 20 degrees F. The set has not come back. Kevin Wilks Kevin's TV & Video Repair Penticton BC Canada kevintv@xxxxxxx -----Original Message----- From: techassist-bounce@xxxxxxxxxxxxx [mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of teltek3 Sent: Thursday, July 03, 2003 11:35 AM To: techassist@xxxxxxxxxxxxx Subject: [TechAssist] Samsung TXE274G Anyone have any ideas on what components to change to make the Vert O/P IC run cooler. Uses a TDA8350Q. Seems to me these IC's run pretty warm, but I'm afraid this one is running a little "tepid". -Ed- Tel-Tek Electronics Ontario-Canada teltek3@xxxxxxxxxxxx ************************************************************************ ***** CHECK OUT THE NEW CHATROOM! Just login and click on chat! http://www.tech-assist.org/secure/tip/main.htm The Tech Address Book: http://www.tech-assist.org/secure/tip/contact.htm Add a Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.htm Lost Password: http://www.tech-assist.org and select "Lost your Login Info?". Email Archives: //www.freelists.org/archives/techassist/ ***************************************************************************** CHECK OUT THE NEW CHATROOM! Just login and click on chat! http://www.tech-assist.org/secure/tip/main.htm The Tech Address Book: http://www.tech-assist.org/secure/tip/contact.htm Add a Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.htm Lost Password: http://www.tech-assist.org and select "Lost your Login Info?". Email Archives: //www.freelists.org/archives/techassist/
