Hi Mark Wins tip says bad solder connection on flyback. Clean then re solder. Hope this helps. Cliff. Double Zero Electronics. The trouble shooter. sgt.cliff@xxxxxxx ----- Original Message ----- From: "Mark Simpson" <res050hb@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, October 24, 2002 5:58 PM Subject: [TechAssist] Samsung TXE2545 dead click....click......click > > Removed HOT, steady 130V at collector,relay stays closed.D202 is > overloaded(flashes when contacts close)but no obvious shorts.Please any Tips > or prints on this one.TIA > Mark Simpson > Mark Electronics > Plant City,FL > (813)717-9700 > res050hb@xxxxxxx > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/