Also, short on-time. If your degausser is leaving color blotches it may be due to too short of a degauss period. Damon Brunger damon101@xxxxxxxxxxxxxx Telrad Electronic Services Ft Wayne, IN 46815 ----- Original Message ----- From: "Shoreline Electronics" <jstielau@xxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Saturday, November 24, 2001 11:03 AM Subject: [TechAssist] Re: Samsung TDX2022 > > If I'm not mistaken....Degaussing will only take place when the set is cold. > > If it's relay controlled then I'd consider > > 1) Int relay drive > 2) Int relay contacts. ( You said you replaced) > 3) Int thermistor (if it uses one) > 4) Int degaussing coil > > > > Sounds like fun! > > Jeff Stielau > Shoreline Electronics Repair > 125 Beechtree Lane > Westbrook,CT 06498 > 860-399-1861 Voice > 860-664-3535 Fax > jstielau@xxxxxxxx > > ----- Original Message ----- > From: "Ray Lufkin" <Rlufkin@xxxxxxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Saturday, November 24, 2001 10:34 AM > Subject: [TechAssist] Re: Samsung TDX2022 > > > > > > maybe the shadow mask is loose in the tube. Bang on the face of the crt or > > shake it real hard and look for colors... > > > > > > > > > > ----- Original Message ----- > > From: <tvdoctors@xxxxxxxxxxxxx> > > To: <techassist@xxxxxxxxxxxxx> > > Sent: Saturday, November 24, 2001 12:08 AM > > Subject: [TechAssist] Samsung TDX2022 > > > > > > > Degaussing problems! Resoldered all connections in degaussing circuit, > > replaced degaussing relay, plug in, works for hours on in in my shop. > > Customer takes home, brings right back with color distortion. Recheck > > circuit. Relay only activates one time while set is plugged in when set is > > turned on. Other times micro wont activate until set is unplugged then > > plugged in again. Rapped, Tapped and short of beating the board to death. > I > > can't make it go to discoloration. Anyone have a similar problem like this > > and what the fix is? Frustrated in Washington, Neil > > > > > > > > > > > > > > > > > > TV Doctors 108 W. Main St. Monroe,Wa. 98272 360-794-6469 > > > > > > ================================= > > > Help make your TechAssist database better! > > > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips > > > ================================= > > > To UNSUBSCRIBE your email address, click here: > > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > > > > > > > ================================= > > Help make your TechAssist database better! > > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips > > ================================= > > To UNSUBSCRIBE your email address, click here: > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > > > > ================================= > Help make your TechAssist database better! > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips > ================================= > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > > ================================= Help make your TechAssist database better! Submit your fixes here: http://circuitwork.com/techassist/tip/#tips ================================= To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe