ED, pin 2 & 3 should read about 4K one way and inf. the other. If its reading shorted or low res. Its bad. John Conti's TV Texas >From: "Tel-Tek Electronics" <teltek3@xxxxxxxxxxxx> >Reply-To: techassist@xxxxxxxxxxxxx >To: <techassist@xxxxxxxxxxxxx> >Subject: [TechAssist] STR53041 >Date: Tue, 14 Feb 2006 13:45:43 -0500 > >Would someone have a known good STR53041 in stock that could measure the >resistance between pin 2 and 3 of this regulator. >I have one I pulled out of the set, and it shows a short, or very little >resistance on those 2 legs. So I had one in my bin, that I may have >installed before, and I get the same reading. >Can someone measure pin 2 and 3 and tell me what they get. > >Thanks. > >-Ed- >E. Gaidies >Tel-Tek Electronics >Ontario-Canada >teltek3@xxxxxxxxxxxx >----------------------------------------------------------------------------- >This Email List is accessible to the general public through search engines. >Remove: http://www.tech-assist.org/remove.htm >Set Vacation >mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation >Lost Password: http://www.tech-assist.org and select "Login Problems?". >Email Archives: //www.freelists.org/archives/techassist/ _________________________________________________________________ Express yourself instantly with MSN Messenger! Download today - it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/ ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/