Kevin, Check the loading motor, there is a small white gear- normally have a crack. Did you see any error code on the FL display e.g: 1L 12 03 .. Panday >From: "Kevin Gunn" <kgunn@xxxxxxxxxx> >Reply-To: techassist@xxxxxxxxxxxxx >To: <techassist@xxxxxxxxxxxxx> >Subject: [TechAssist] SONY SLV-380 *Won't Shut OFF* >Date: Fri, 10 Jan 2003 09:37:28 -0500 > >I have a SONY SLV380 Vcr that when first plugged in will accept tape and >play no problem. >If you EJECT tape once it will no longer accept tape, the VCR will not shut >off unless you unplug it. If you wait about a half hour until unit is cold >and plug in it goes through the same routine. > >Any ideas would be appreciated. > >Kevin Gunn >Star Tek Electronic Services >390 Springbank Drive >London, Ontario >www.startek.701.com > >N6J 1G9 519-473-6366 > >------------------------------------------ >Submit A Repair Tip For Everyone Here: >http://www.tech-assist.org/secure/tip/main.html >------------------------------------------ >To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html >To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html _________________________________________________________________ Help STOP SPAM: Try the new MSN 8 and get 2 months FREE* http://join.msn.com/?page=features/junkmail ------------------------------------------ Submit A Repair Tip For Everyone Here: http://www.tech-assist.org/secure/tip/main.html ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html