[TechAssist] Re: SONY PS2
- From: "Rs Tek Inc" <rstek@xxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Thu, 7 Feb 2002 16:02:44 -0500
you take the screws out of the bottom under the rubber and plastic covers.
If you've never done it before then you should check out www.modchip.com and
make sure you hook up the chip right. There are different versions of ps2's
with different chip connections. You can damage those ps2's very easilly
if your not extra careful.
Frank
----- Original Message -----
From: "res0nvn4" <kahuna.tvsrc@xxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Thursday, February 07, 2002 3:26 PM
Subject: [TechAssist] SONY PS2
>
> Hello techs,
>
> A customer asked me to install a mod chip on this unit...
>
> I dont' even know how to open it!
>
> Can anyone tell me how?
>
> Thanks,
> Marcello
>
> ------------------------------------------
> Make your TechAssist database better!
> Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.
>
>
------------------------------------------
Make your TechAssist database better!
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.
Other related posts:
